Air Leak Detection Equipment of Battery Pack Tester
|
Item
|
Testing Machine
|
|
Test medium
|
Compressed air or specified medium by customers
|
|
Gas source
|
0.4-0.8MPA (clean, dry)
|
|
Power supply
|
AC220V(±15%),50HZ,ground lead
|
|
Environmental temperature
|
0-50℃
|
|
Environmental humidity
|
≤95% (not dew)
|
|
Pressure adjustment range
|
-20kPa~150kPa
|
|
Number of test ports
|
1
|
|
Status of the tested product
|
With or without hole, semi finished or finished product
|
|
Pressure mode
|
Positive and negative pressure
|
|
Pressure adjustment precision
|
0.05%F.S
|
|
Measurement range of the senor
|
-20kPa~150kPa
|
|
Measurement range precision of the senor
|
0.02%FS
|
|
Pressure minimum setting unit
|
1Pa
|
|
Resolution ratio
|
1Pa
|
|
Dimension
|
335*305*285
|
|
Gross weight
|
11KG
|
Application range
Class D is a consumer electronics level universal instrument, its advantages are high precision, strong compatibility, can greatly meet different test conditions, it's very suitable for precision detection.
SLA leak test detector allows only a positive misjudgment. That is, products that fall within the critical point of the criteria may be judged as bad, but they will never be qualified. (The critical point of evaluation criteria is theoretically eternal, so need to be upgraded to minimize critical mass in actual production)
Model introduction:
SLA- M－150 1－D
One test port Consumer electronics
Air type Positive and negative pressure -30~150KPa
Direct pressure type
Remark: If the specific model or parameters has some modification, please checking with sales manager.
