Valve Leak Detector
Compressed air or specified medium by customers
|0.4-0.8MPA (clean, dry)|
≤95% (not dew)
Pressure adjustment range:
Number of test ports:
|Status of the tested product||With or without hole, finished or semi product|
|Pressure mode:||Positive and negative pressure|
|Pressure regulation accuracy:||0.05%F.S/0.02%F.S (Full range accuracy optional)|
|Sensor selection range:||0-10kPa|
|Pressure minimum setting unit:||1Pa|
SLA leak test detector is mainly used for scientific experiments in the laboratory or for the full inspection of the product in the production line. It can be independently used as a testing station, operated manually; or fused with the automatic line body to become one of the testing stations, which can be operated automatically. The leak detector takes clean and dry compressed air as the detection medium, and through a series of automatic detection, analysis and calculation processes, such as pressure sensor, precision pressure regulating valve, calculation unit and so on, the determination of the good and bad of the tested products is completed.
Watches often require leak testing. Testing a typical Silicon Valley waterproof smartwatch with microphones and speakers would be leak tested differently than a mechanical watch since the smartwatch has ports to test. A luxury mechanical watch, however, is completely sealed with no ports or equalizing membranes to test.
Class D is a consumer electronics level universal instrument, its advantages are high precision, strong compatibility, can greatly meet different test conditions, it's very suitable for precision detection.
SLA- M－150 1－D
One test port Consumer electronics
Air type Positive and negative pressure -30~150KPa
Direct pressure type
Remark: If the specific model or parameters has some modification, please checking with sales manager.